The biggest disadvantage to possession of a pool maintenance. Pumps, filters, chemicals, water balance and again and again. Access to the possession of a coil, and the first reaction is "not a lot of work?" Is not necessary. You can create a routine that takes just minutes a few times a week and keep your pool clean, bright and welcoming each time you want to use. Here's how:

Phase 1, water balance

This is the most important step. Whenopen the pool in the spring, an effort to ensure the pool water is in the correct range for pH and total alkalinity. These parameters work together to create a stable balance to ensure that the pool water will be much easier to do. The proper pH range 7,2-7,6. Total alkalinity is ideal for about 180 pages in minutes. Below 100ppm and 400ppm can be particularly difficult.

Phase 2, disinfect

The pool water is properly balanced, so it's time to add Sanitizer. TheThe idea is to maintain a minimum of 1.5 to 3ppm of chlorine at all times. This level is high enough to suppress the growth of bacteria and algae, the bad nasty primary in water pool. The most popular form of chlorine tablets or sticks. Add to Cart skimmer or automatic document feeder. As the water flows necessary to dissolve tablets or sticks liquid feed is not as effective.

Phase 3, Shock

In addition to regular chlorination or shocking weeklyincrease the level of chlorine to 5ppm is a great way to ensure contaminants do not build and problems. It 'also a good idea to shock the pool after heavy use because it was to help bridge the chlorine, so the problems do not meet once.

Phase 4, Algae Control

In a proper balance and disinfection of the pool must have a problem with algae. To be sure, add algaecide weekly according to the manufacturer's instructions for any eventuality.

Here it isschedule

1. Every other day, testing the pool water. Use the test strips or a kit DPD and measurement of free chlorine, pH and total alkalinity. Add chemicals as necessary.

2. Once a week, add algaecide and shock.

Remember, follow the instructions on the chemicals used exactly. Never add chemicals to water, adding chemicals to water.

That's all there is to do. Both steps 1 and 2 should not last more than 5-10 minutes for a total of about 40-50 minutes per weekthe maintenance of your pool! better yet, if the program successfully, then the pot is always ready for use.